Although conventionally engines exposed to cold weather is the most known problem related to issues starting difficulties http://www.automobileglobe.com/what-to-do-when-a-cold-engine-is-hard-to-start/, hot engines might bring obstacles as well. Many people realize that the vehicle do not start as easily as it should when the engine is hot and do not know what to do about it. In order to be able to overcome this challenge, it is vital to start by learning why it happens.
Most of the factors by which a hot engine would be hard to start are based on issues related to the fuel. When the engine is too hot, fuel can’t circulate correctly due to the way in which vapor obstructs it and therefore the engine wouldn’t start as easily as it should or it wouldn’t crank at all.
SEE ALSO:HOW TO KNOW A BAD STARTER
A vehicle engine would keep on gaining temperature until a while after it was shut off. During this period of time is when the highest amount of vapor would be passing around and therefore that is when the chances it obstructs the engine are bigger as well. This way, if you are driving in hot weather and you have just shut off the vehicle in which you experience start problems, you should wait for a few minutes until starting it back.
Fuel injected engines do not notice this problem as much as others do due to the fact that the fuel remains inside the injectors by being under a very high pressure. This way, fuel injected engines would not get so easily obtruded by vapors as other engines would and therefore the vehicle would not have the same problems to start as another would.
Also, engines might become hard to start while being hot if its the season in which refiners change from a fuel blend to another. Sometimes gasoline refiners vary from a higher volatility fuel to a lower one when summer approaches due to the way in which hot weather causes fuel to evaporate easier. If refiners go back to a higher volatility fuel while the engine is still exposed to days of high temperatures, this could make the fuel to evaporate too much creating too much vapor and therefore obtruding the engine.