WHAT ARE 6 BRAKE LINE CHANGE TIPS

Your brakes are the most vital safety feature on your vehicle and brake line replacement is essential if they become worn or spoilt. You need to be aware of any brake issues before they result in an accident. A soft pedal or a parking brake that slips are usually the first symptoms of trouble. Since your brakes are so vital to the safe operation of your car, you should only change the brake lines if you are a confident mechanic. Even the most confident of mechanics should keep the following tips in mind when replacing their brake lines.

Safety First

It’s always dangerous any time you get under a car. Before you start working on your brake lines make sure the car is properly supported. If you are lucky enough to have access to a hoist, use it. For brake line repairs at home, make sure that the car is stable on its ramps, and block the wheels on the ground so the vehicle won’t roll on you. Since brake fluid is very slippery, have a bucket or pan ready to catch brake fluid, as well as a bunch of rags to clean up any spills.

Change the Whole Line

Changing only a section of your brake line is only a temporary fix and is asking for more problems. If you see a bulge or rust on part of your brake line, these issues could be hiding beneath the surface along the rest of the line. Putting joints in your brake line, no matter how well you do the job, is giving more areas where brake fluid can leak out, and making you unable to stop. Changing the whole line is also easier, as you can attach each end to the factory installed mounts.

Change in Pairs

Your brake lines were installed at the same time when your car was built, so chances are they will both need change at the same time. Changing both brake lines will also mean that you’ll do a better job. You will fix any mistakes on the second brake line, and you will also have the chance to go back and fix problems you discover when replacing the second line. You will also find that you change the second line a lot faster than the first, because you have a better idea of what you are doing.

Stainless Steel

Not only do stainless steel brake lines work better, they will actually hold up a lot longer than rubber break lines. Rubber brake lines have the habit to bulge over time, making your brake peddle soft and less effective. Stainless steel tubes will ensure a constant brake fluid pressure. You can pick up stainless steel brake lines at any auto parts and accessories store.

Keep It Clean

Clean the surroundings around brake line mounts before you start removing the old brake lines. This will prevent corrosive materials and grit that can block your brake line from getting in your new brake lines. Having the brake line mounts clean will also make attaching your new brake lines easier.

Bleeding

The final step in brake line change, bleeding air out of the brake fluid is vital. Fill the brake fluid reservoir in the engine compartment then use a hand-pump vacuum at the bleed valve to pull the brake fluid through the lines. Getting air out of the brake lines will make sure you stop every time you put your foot on the brake.

SEE ALSO: