What to know about lubricating the steering and suspension:

The steering and suspension systems work together to make the vehicle handle smoothly and comfortably. Proper oiling is required to keep things operating correctly, as every moving part (of which there are many) experiences friction. Every part between the body of the vehicle and the wheels plays an essential role in keeping everything moving down the road.


Facts to Note:

Lubrication will not fix anything broken, though it can make parts work more smoothly.

Some parts in the steering and suspension are permanently lubricated and sealed from the factory. These parts may need servicing or replacement if they are experiencing excess friction

Each vehicle will have its own quirks and issues in the steering and suspension, looking for any manufacturer warnings about certain parts or services is important.

How to Fix:

Apply grease to the zerk fittings of all the steering and suspension parts.

Our Proposal:

Read the vehicle’s manual to see if the manufacturer has certain suggestions for lubrication and other preventative maintenance on the suspension and steering. While accessing parts for servicing, check each and every connection for points that can be lubricated. Some points will require a grease gun while others will require aerosol lubricant. Wipe down dusty or muddy parts with a rag while lubricating to make sure the new lubricant stays clean for as long as it can. Check parts for excess wear and other signs of friction while inspecting.



Common symptoms indicating you need to lubricate the steering and suspension:

Squeaking noise when turning or going over bumps

Groaning sound when turning

Suspension is bumpy and doesn’t work smoothly

Loud noise when turning the vehicle

Importance of this service:

This service is quite necessary to keep a vehicle functioning safely for a long time. Not only will the ride be negatively affected by bad suspension, but poor handling could cause an accident. Steering parts, especially, need to be monitored for excess wear and friction, as the failure of these parts could be catastrophic.