SRS is a light that usually flashes on the instrument cluster on the dashboard. Though annoying, most car owners tend to ignore it, which can be quiet dangerous. When the SRS light is on action should be taken quickly as lack of it could lead to a fatal accident. You may be wondering what the SRS means for your car and how you should go about fixing it. Well, here we will go into detail about this problem and give you ideas on how you can rectify it.
WHAT DOES SRS MEAN?
The SRS light is also known as the Airbag light stands for “supplemental restraint system”. The system consists of sensors, a module that is used to interpret the signal and an airbag which is activated by a charge on the bag. It is a warning light that indicates that there is a problem with your Airbag Control Unit, causing the system to disable. This means that in the event of an accident the airbag would not be activated. We all know at least one person who escaped a near fatal accident when the airbag deployed after an impact, right?
On top of this, the SRS system is connected with the seat belts. Once you latch in your seat-belt, the SRS system becomes part of the seat belt system. What happens is that in case of a collision the computer works on tightening the seat belt. This prevents physical harm to the people in the vehicle.
WHY IS THE SRS LIGHT ON?
One thing to note is that once you start your vehicle, the SRS system does a self-test for about 15 seconds. In this short period when it is testing the light will be on and should not be a source of worry. Once the system is done and everything is okay the light will go off automatically. However, if the light stays on, then you should be worried as it signals that there is a problem somewhere. This is a safety concern issue that should be looked into immediately.
After you notice that your SRS light is on you must be wondering what is causing this. As we mentioned earlier the warning means that the components of the restraint system are faulty. Some of the issues that could be causing the light to turn on include;
• A defective crash sensor or one that needs a reset
• The clock spring inside the steering wheel may be damaged.
• The seat belt switch may be faulty.
• A car battery that does not have energy may prevent the airbag light from turning off.
• A corroded or wet control module may set the SRS light on.
• The seat-belt system may also fail due to regular use .g when coins fall into the buckle. This sends an erroneous signal to the SRS system causing the light to turn on.
The reasons behind a flashing SRS light are many and steps should be taken to avoid a catastrophic occurrence.
IS IT SAFE TO DRIVE WITH THESE LIGHT ON?
Having an SRS light doesn’t indicate that your car is unsafe to drive. However, the results of driving it are not something that you should wish to gamble with. Driving such a car is a risk that can turn out to be extremely costly. The minute you realize that your SRS light is on then you should be very worried. Reason being that this is one of the most dangerous signs you could have on. Remember, it is vital for offering you protection in an event of an accident. Thus, an SRS warning will need your attention fast to avoid driving to a grave.
WHAT SHOULD I DO WHEN THE SRS LIGHT ON?
When you notice that your airbag light is on you should immediately work on the situation. If you were on the road, you should simply pull to the side of the road and try to collect your thoughts on your next step. There are two ways in which you can reverse an SRS light, one is using an OBD2 scanning tool to diagnose the problem or visiting a mechanic for a professional to check and fix the problem.
Check your vehicle with an OBD2 Scanner
Today, you can easily fix some of the car problems do not require a trip to the garage. An OBD2 scan tool reads the code on your ABS within minutes to make a diagnosis. What you need to do is scan the car for problems. The scanning tool will display error codes on its interface. Some advanced OBD2 scanning tools will also display the meaning of the error codes. After figuring what the issue is you will be in a position to make a decision on your next step. If it’s an issue that you feel confident that you can handle, roll up your sleeves and go for it. After this, you will need to reset the ARS. To do this you can reset by just clicking on the reset button on your scanning tool or do it manually. The first step to doing it manually is to turn on the ignition, after which the ARS light turns for a few seconds. Once the airbag light goes off, you need to turn off the ignition very fast. Repeat the process a few more times till the light stops flashing.
Take your vehicle to the garage
If you do not have an Obd2 diagnostic tool or if you encounter complex errors, then it will be time to make a visit to your local garage. A professional mechanic will be better equipped to give you more details on the repairs and costs of fixing your car. After getting the cost of repairs you can go ahead and have the issue dealt with. This is not only a safety measure but will also give you immense peace of mind. However, if the costs are too high you should consider disposing of the car, to avoid having a money draining pit in form of a car.
The SRS computerized system is a safeguard that evaluates data from the sensors. It then chooses an action that prevents car occupants from obtaining physical damage. If the airbag is not functioning properly then you may be driving to an early grave. The fact that its malfunction may cost you your life shows just how important it is to ensure that your SRS system is in the top-notch condition always.