Depending on your Honda brand and trim, this process may vary a bit. However we will go over the most common way to reset the maintenance minder light. If for some reason this does not seem to work on your specific vehicle, the instructions to reset this light can be seen in your owner’s manual. For most Honda brands, the following instructions will help you to reset the Maintenance Minder light.
- Start by turning the ignition switch to the “on” position, this should be position II.
- Then press and hold the select/reset knob until the oil life indicator appears. This will show “oil life” and have a percentage. Resetting this light will change the percentage that appears to 100%.
- Press the knob again and hold it for more than 10 seconds. This oil life indicator as well as a maintenance item code will begin to blink.
- Press the select reset knob one more time and hold for additional 5 seconds. The maintenance code will disappear from the screen and the oil life will now show 100%.
That’s done! At this point the Maintenance Minder light is completely reset and will sure alert you the next time you are due for scheduled maintenance.