What is the Exhaust Gas Recirculation/EGR Valve?
The EGR (Exhaust Gas Recirculation) valve assist lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the part of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby limiting the emissions.
The EGR valve is found in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.
Bear in mind:
During the EGR valve change, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.
How it’s done:
- Scan the computer system in the vehicle.
- Check all vacuum related hoses to EGR valve.
- Check EGR transducer.
- Verify the EGR port is not plugged.
- Remove and change the EGR valve.
- Clean the carbon deposit on EGR pintle.
- Clear the trouble codes and test for proper operation of EGR valve.
It is a good idea to get an air induction (carbon cleaning) service carried out every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help keep sludge build up in the engine.
What common signs indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?
- Check Engine light is on.
- Possible loss of power.
- Car will not run smoothly (shake, stumble, may stall).
How Vital is this service?
The EGR valve helps your car recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your car will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your vehicle will not pass an emission inspection.
WATCH THE VIDEO BELOW: