HOW TO KNOW BAD IGNITION MODULE

The ignition module is in charge of creating the spark that starts your engine, so when your vehicle doesn’t turn over, testing this component is a good place to begin. You will want to check whether the ignition module is producing electricity and that the electricity is getting to the spark plugs to get your engine going. With this piece being on both sides of the dashboard, you will need some help with testing. Care is also required since you are working with electricity, so follow the directions below to complete this task safely and successfully.

1 – FIND IGNITION MODULE

To find the ignition module, check the wiring diagram for your vehicle’s particular  model. As you might guess, the placement can vary based on the type of vehicle, so it is important to have the correct diagram or you will be practically working in blind. You’ll want to know the terminals running in and out of the module once you have found it.

2 – Check Module Current

Ground the negative lead from your DVOM to the vehicle’s metal frame. Then, while your assistant turns the key, probe the ignition module’s terminals for current. If there is no current, you will need to change this part entirely.

3 – Check Spark Plug Current

As mentioned above, you will also need to be sure that the electricity from the module is getting to the spark plugs as well. Test this by connecting a 12V test light to your spark plug terminals. If the light flickers when the ignition is cranked, you will need to check other components for a solution to your vehicle starting problem. If the light does not come on, inspect the wiring to the spark plugs for other signs like burn marks, fraying, and breaks.

You can equally use your DVOM to check for continuity if there are no obvious visual signs of damage. Switch your meter to the Ohms setting and test the wiring again. An infinite reading on your meter means that there is no continuity and your wiring is faulty. Make sure to check all wiring going to and from the ignition module and spark plugs since wires are much easier and cheaper to change than engine parts.

If your ignition module does need change, you can choose to do it yourself if you’re confident in your level of experience. However for amateur, it may be better to seek professional assistance