HOW TO DO SPARK PLUG REPLACEMENT IN CARS

HOW TO DO SPARK PLUG REPLACEMENT IN CARSWhat are the Spark Plugs?

The spark plugs are an essential part of the ignition system. When you turn the ignition key (car’s key) on, it causes the ignition coil to create the spark which ignites the air-fuel mixture in the engine cylinders to start the engine. The number of spark plugs in the car is the same as the number of cylinders, although some vehicle manufacturers will use two spark plugs per cylinder.

 

Over time, the spark plugs wear out and need replacement. When the spark plugs wear out, it is harder for it the air-fuel mixture to ignite, resulting in engine misfires. If one of the spark plugs has failed, the car will still start and run, but it will run poorly. On some vehicles, spark plug replacement may be labor intensive and involve removal of the intake plenum.

 

READ ALSO: WHAT TO KNOW ABOUT RESET INDICATOR LIGHT REPLACEMENT IN CARS

Don’t Forget:

When the spark plugs are changed, it is a good idea to inspect the ignition cables as well.

Spark plugs come in numerous ratings, and the correct rating for your vehicle should always be used.

How to Fix:

  • Scan the car for codes.
  • Clean all surface areas around the spark plugs.
  • Remove spark plugs.
  • Inspect threads in engine head (where plugs are installed).
  • Perform compression test if needed.
  • Inspect ignition wires.
  • Apply anti-seize to the threads of the spark plugs.
  • Install new spark plugs.
  • If needed replace any gaskets removed.

Our Proposal:

During routine upkeep and checkups, your ignition system should always be examined. Any time that a component of the ignition system is changed, it’s a good idea to consider changing the spark plugs as well. If you don’t preemptively change your spark plugs your engine will let you know by misfiring or running poorly, so schedule an inspection as soon as you notice that your engine is not performing properly.

 

READ ALSO: HOW TO CARRY OUT REVERSE LIGHT BULB REPLACEMENT IN CARS

Common signs indicating you may need to change the Spark Plugs:

Check Engine light is on.

Engine misfires.

Poor fuel economy.

Vibration coming from the engine.

Importance of this service:

Spark plugs are in control of igniting the fuel that your engine uses to run. When you turn your key, a small voltage of power is directed to the ignition coil, where it is transformed into high voltage currency. This high voltage currency is sent through the ignition cables to the spark plugs. The spark plugs use the power to create a spark, which ignites the fuel, and allows the engine to function.

 

When the spark plugs breakdown, this spark won’t be produced, and the fuel will not be ignited as it should. Your vehicle has many spark plugs, so depending on how many fail, your engine may either run poorly, or not run at all. Continuing to drive a vehicle with malfunctioning spark plugs can also cause damage to the catalytic converter.