HOW TO DO FUEL INJECTOR REPLACEMENT IN CARS (COMPREHENSIVE GUIDE)

HOW TO DO FUEL INJECTOR REPLACEMENT IN CARS (COMPREHENSIVE GUIDE)What is the Fuel Injector?

Fuel needs to be conveyed from the gas tank to the engine where it can burn and provide power to the car. Gas from the tank goes to the engine by passing through the fuel injector. The fuel injector converts the liquid gas to a fine mist (spray) so that it can burn easily.

 

The number of injectors is the same as the number of cylinders in an engine. (For example, a four cylinder engine will have four fuel injectors.) Gas is delivered from the fuel pump through the fuel rail and is directed to the fuel injectors.

 

READ ALSO: WHAT TO KNOW ABOUT EGR PRESSURE FEEDBACK SENSOR REPLACEMENT IN CARS

Bear in mind:

Your mechanic will mount a new fuel filter (unless the fuel filter is inside the fuel pump) and change the upper intake manifold gasket if applicable. Both are recommended during this service.

 

How to Fix:

Scan the computer system in the car for codes.

Visually inspect injectors for any signs of fuel/gas leakage.

If reachable, OHM test each injector.

Take out and change the injector if it is bad.

Change the fuel filter it is not inside the fuel pump.

Change the plenum gasket.

Inspect for fuel leakage.

Clear diagnostic information.

Test drive car.

 

Our Proposal:

You should keep an eye on the manufacture upkeep schedule and get the fuel injectors flushed on a consistent basis. This keeps the fuel injectors clean and will ensure a good spray pattern into the cylinders.

 

READ ALSO: HOW TO DO EGR COOLER REPLACEMENT

Common signs indicating you may need to change the Fuel Injector:

Check engine light is on.

Engine misfires.

Poor gas mileage.

Fuel leakage.

Smell of gas.

Importance of this service:

Your fuel injectors transfer gas from the gas tank into the engine cylinders. Gas enters the fuel injectors in a liquid form, and is converted into a mist, which is then sprayed into the cylinder so that it can burn quickly and resourcefully. If one of your fuel injectors is spoiled, it will not be able to carry out this function, and your vehicle will work without the power of that cylinder. When one cylinder is not powered, your vehicle will not run smoothly, and may misfire. It will also likely have far worse gas mileage.