What to know about Window Motor/Regulator:
The window regulator typically has over a dozen parts that enables it go up or down in a very specific fashion throughout the entire raising or lowering of your windows. These parts all work together in two unique assemblies: the scissor style window regulator and the cable operated window regulator.
There are scissor-style window regulators that work like a great pair of scissors inside your door. They’re usually almost flat when your window is all the way down and in a near perfect X when the window is all the way up. You can view a scissor style regulator as having several thick pieces of steel that keep the window in place. It’s sturdy, but needs a strong motor that often wears out before everything else.
Cable-operated window regulators use a near vertical cable to assist the window get into the right place. It’s a more compact design that puts less stress on the motor. But it is also more susceptible towards being damaged due to the increased stress that the pulley and cable must harness to raise and lower your window. In most cases, a cable operated window regulator is made up of one thick piece of metal with a pulley and wire attached to it — along with a more compact motor.
The electric motor is constructed to withstand a certain number of raises and lowering of your window. While the regulator helps keep the window in place, the motor provides the force needed to make the window stay exactly where you like.
Facts to Note:
A window regulator assembly is made up of two parts: a motor and a regulator. These parts when replaced typically require you to deal with the removal of your door panel, clips, and in certain cases, even the removal of rivets and the specific removal of multiple related components.
A window regulator assembly is usually a complicated piece of device that can require specialized tools and a lot of patience — work best left to a professional mechanic.
How to fix:
The inside door panel is removed
The electrical connection is uninstalled and motor removed
The window regulator is changed
The window motor is reinstalled
The inside door panel is reinstalled and the window is tested
If your window is gradually starting to slow down it’s often better to take care of it while the window can be shut. Once a window regulator stops functioning completely, it rarely starts working again unless you have other issues that can be identified by a mechanical inspection.
You should get it inspected by a professional mechanic who can test the multiple parts that provide the power needed to make the window and regulator assembly work properly.
Common symptoms indicating you may need to replace the Window Motor/Regulator Assembly:
If your window is going down ever more slowly, stopping, or needs several presses of the power window button to close, chances are your motor is wearing out.
The window regulator assembly can also derail or completely detach from the window. If you find that the window doesn’t close evenly or hear banging noises inside your door, that assembly may need a closer look.
Importance of this service:
A properly operating window motor and regulator let you, your passengers, and your car’s interior to remain dry and safe. Sometimes a window regulator will stop working entirely without the window being fully closed. So of course, getting this service done sooner is better than waiting for an outright failure to occur.
The interiors and power features of your vehicle can also get spoilt due to one heavy rainfall that can happen when you least suspect it. So if you’re having issues now, keep you and your car dry by having the issues solved.