HOW TO CHANGE A DOME LIGHT BULB AND FUSE IN CARS

HOW TO CHANGE A DOME LIGHT BULB AND FUSE Well if there’s no power going to your dome light, you should probably check your service manual and see where your fuse box is located. Then find what number fuse you should check to see if it’s blown. – First we need to remove the cover on the dome light. Typically there’s a small notch in the plastic. Take a small screwdriver, and insert it in the notch, and pop out the cover.

With the cover off, turn the light switch on again, and confirm which light is out. Then pop out the bad light. In our case, we only had one bulb within the housing, so it wasn’t a big deal. Now insert the new bulb, which might require a little bit of wiggling. If the bulb works, pop the cover on, that’s it. Pretty simple, however, if the light still doesn’t go on, we’ll need to check for a blown fuse.

READ ALSO: HOW TO CHANGE DRUM BRAKES IN CARS

Find the location of the fuse box in your owner’s manual. Once located, remove the fuse box cover. There’ll be a diagram on the inside explaining what electrical component each fuse controls. Find the dome or interior light, which is in numerical order according to the diagram. Use the fuse puller, typically found in the fuse box itself, or small pliers. If the fuse is blown, like this one here, the metal strip inside will be cut or broken confirming its blown and in need of replacing.

Replace the blown fuse with the same amperage. Never use a higher amp fuse, as an overloaded circuit could result in an electrical fire. Having a working interior light is more than just a nice feature. If you’ve ever dropped your keys, or phone in your car at night, you’ll appreciate having a working light.