HOW ABS SPEED SENSORS ARE REPLACED

What is the ABS Speed Sensor all about?

Most modern cars have anti­-lock brake systems that use sensors to detect wheel rotation rates, reporting to a computer that is able to modulate brake pressure if one or more wheels should lock during a braking operation. Usually the sensor is a Hall­ effect, or so-­called reluctance parts, which looks at a toothed ring (called a tone ring) that is affixed to the wheel or axle. The teeth passing by the sensor creates a wave form that can be recognized and interpreted by the ABS controller. On three-channel ABS systems (typically found on older pickups), the rear axle is monitored by one sensor while the front wheels have their own individual sensors and anti­-lock control. Four-channel systems monitor each wheel on their own.

Bear in mind:

  • If one or more ABS speed sensors fail, the entire system defaults to a non-­operational status, providing no anti­-lock control. The diagnostic system will show to the mechanic which sensors (if more than one) have failed.
  • If a sensor fails, the ABS warning light will illuminate every time you start the vehicle, and stay lit.
  • If you lose ABS intervention, you may lock up the brakes in an emergency, increasing stopping distance and losing all steering ability.

How it’s done:

  • The car is raised and supported, then the tire is removed
  • The defective ABS Sensor is replaced
  • The tire is reinstalled and the vehicle is lowered
  • The ABS system is rechecked for any codes
  • The vehicle is road tested for proper operation

SEE ALSO:WHAT MAKES AN ENGINE IDLE AT HIGH SPEED

Our recommendation:

Have a mechanic check the vehicle’s brake system and replace any wheel speed sensors that are defective. The difference between a vehicle with and without operational ABS is potentially a matter of life and death. Your brakes will still operate, but the chances of a lockup on slippery surfaces or in an emergency – without ABS – are pretty much 100­ percent.

What common symptoms indicate you may need to change the ABS Speed Sensor?

  • The ABS warning light will illuminate when the vehicle is started, and it will stay on permanently.
  • If you test the brakes on gravel or ice, you will no longer feel or hear the ABS mechanisms kick in, and the brakes will lock up.

How important is this repairs?

Functional ABS is the difference between being able to simultaneously brake and steer past an obstacle, or locking up and hitting it. It’s considered important enough for insurance companies to offer discounts to owners of vehicles equipped with ABS systems. With a failed speed sensor, you’re driving around with sophisticated electronic control systems, relays and sensors that could save your life. If only they worked.