Fuel oil, diesel oil, and greasing oil tanks are the names of tanks everyone is aware of. But there are several tanks apart from them which also play an essential part in the overall functioning of the ship. Furthermore, there are also tanks of which many people are not aware of. In this post we will have a look at some vital and some not-so-popular tanks present on the ship.
- Hydraulic oil tanks
- Hydraulic oil tanks for valves
Different tanks are used to store oil which is used for different valves on the ship. Valves such as ballast valves, fuel valves etc. are remotely run by hydraulic oil.
- Hydraulic oil tanks for Winches
Tanks for hydraulic oil are situated outside the engine room to store winches oil.
- Hydraulic oil tanks for Steering gear
Steering gear hydraulic oil tank is usually situated in the steering room and is used as a storage tank to receive bulk oil.
- Water tanks
- Fresh water tanks
Fresh water tanks present onboard may be two or more in numbers, depending upon the size of vessel. They are used to store sanitary water for accommodation, engine room and deck use.
- Drinking water tank
A separate drinking water tank may be present to store drinkable water received from shore or to store water produced by fresh water generator (F.W.G).
READ ALSO: WHAT TO KNOW ABOUT TELEMEDICINE FOR SHIPS
- Distilled Feed water tank
A ship’s boiler needs distilled water to produce steam, and therefore water from fresh water generator (F.W.G) is stored in distilled water tank.
- Boiler feed water tank
The boiler feed water system consist of a separate tank which receives water from distilled water tank.
- Cascade tank
Cascade tank, also known as hot well, is a part of boiler feed water system. Water is pumped into the cascade tank from the feed water tank. The boiler water is treated in the cascade tank and the return from the steam heating system is also linked to the hot well.
- Ballast water tanks
Ballast water tanks are present all over the ship for ballasting and de-ballasting purpose for stabilizing the ship and for acquiring precise draught for port and canal crossing etc. Double bottom tanks are generally situated outside the engine room.
- Stern tube cooling water tank
This tank is situated around the stern tube of the propeller and acts as a cooling media for the same. It can be used as a fresh water tank of the ship.
- Slop tanks
- Slop tank in tanker
Slop tanks are present onboard tanker to store oily water mixture from cargo tank washing. The number of slop tanks depends on the Dead weight Tonnage (DWT) of the vessel.
READ ALSO: WHAT TO KNOW ABOUT PROP GUARD IN SHIPS
- Sludge tank
Situated in engine room, this tank is used to store sludge produced after treating fuel or lube oil through purifiers.
- Bilge tank
The water and oil leakage in the engine room is collected in bilge wells and this oily water mixture is then transported to primary bilge tank or bilge holding tank, where the mixture is settled down and then is transferred to secondary bilge tank.
The oily water separator is supplied through secondary or separated bilge tank and a shore connection is also linked to this tank to dispose of all the collected bilge to shore.
- Scavenge drain tank
The sludge produced by the main engine in the scavenge area is collected in the small capacity scavenge drain tank.
- Oily Water Separator (O.W.S) Sludge tank
When oily water separator works, it separates oil from water and that oil is collected and discharged into a separate tank known as O.W.S sludge tank.
Other Not-So-Popular yet Important Tanks
The drain tank is situated in the engine room. All drip trays and other drains are linked to this tank.
Leak off tank
This is a small tank separately fitted in the main engine and all auxiliary engines to detect any fuel leakage. The tank consists of an orifice and a float. If the leak is very small, it will pass through the orifice; but if leakage increases, the oil will not be able to pass through the orifice and tank level would increase, rising the float and thus giving an alarm.
Stuffing Box Tank
The main engine stuffing box scraps the impure lubricating oil, which is collected in a separate tank known as stuffing box tank.
Stern tube gravity tank
The stern tube system oil is circulated in the system by means of two tanks, lower gravity and upper gravity tanks.
Waste oil tank
The waste oil tank is a separate tank used to collect waste and impure oil produced onboard ship.
Soot collecting tank
When the economizer tube washing is done, the soot water is collected in a soot collecting tank.
Sewage holding tank
The sewage produced from the onboard crew is collected in a common tank known as sewage collecting tank. The sewage plant takes intake from the sewage holding tank.
The jacket water system of main engine, auxiliary engine and sometimes main air compressor are provided with individual expansion to provide provision to compensate change in volume and maintaining positive pressure.
Jacket water drain tank
When any maintenance is to be done on the main engine, the jacket water is drained and collected into the jacket water drain tank.
Rocker arm tank
Many diesel generators are delivered with separate rocker arm lubricating oil tank to avoid contamination.